Short and Open Circuit Tracer
Short and Open Circuit Tracer
Short and Open Circuit Tracer EM415pro is designed to identify and trace wires or cables faults without damaging the insulation. Equipped a signal transmitter and a hand held Receiver probe, it can trace to the exact location of the open end within the wire. It can also trace individual wire loom under the carpet and in congested areas.
HOW TO USE THE PROBE
The Receiver probe flexible and may be bent as needed, in order to reach wires in congested or difficult areas. Depending on the circuit characteristic and sensitivity settings, the probe will pick up the signal from the wire in a range of positions. However, for the best possible range the Receiver's probe tip (black cap) should be positioned perpendicular (at 90 deg.) to the wire being traced and either above or below it.
Package contains:
- Receiver probe
- Signal transmitter
- Carry bag.
- Instruction Manual.
- what is the difference between tacho pro 2008 and digiprog3
2016-07-14 - New tool OBDSTAR PRO3 for immo and odometer correction
2016-07-13 - the software of HDD for vas5054 can not be copied
2016-07-12 - vas5054 full chip with OKI and bluetooth
2016-07-11 - hand baby/Cbay open G function
2016-07-10 - the active of FVDI2
2016-07-07 - Launch X431 GDS 12-24V English Diesel Diagnostic Configuration Heavy Duty
2016-07-06 - X100 PAD original key programmer of xtool
2016-07-05 - the code of digiprog3 odometer correction
2016-07-04 - New MB SD Connect Compact 4 with UDS diagnose protocol
2016-07-03
Email: sale@car2diag.com
MSN: sale@car2diag.com
SKYPE: autocables
SKYPE: car2diag03