Vag Diagnostic Tool

Introduction for SuperVAG K+CAN Plus 2.0

1. Support Comprehensive model, support the great majority of VW, Audi, and Skoda model.

2. Support Comprehensive Anti-theft System, such as IMMO1, IMMO2, IMMO3, WFS, etc.

3. Support K-Lines, Can BUS, and UDS protocols

Beta 11.10 includes these additional improvements

- With this function you can establish diagnostic session with the Instrument cluster using KWP2000 over TP2.0
- You can read current odometer value
- You can change odometer value
- Read/Program memory of instrument cluster immobilizer
- Reading security access code of the IMMOBILIZER
- Read/Write immobilizer related data

VAG COM10.6 diagnostic cable works with Windows 2000, XP, Vista, and windows 7 (both 32-bit and 64-bit)

Supports Measuring Values, Output Tests, and Adaptations on control modules using the new UDS/ODX/ASAM protocol.

409.1 ,Supports VAG-COM version 409.1 or older
Fully automatic support for 2002+ Audi models with dual K-lines

vag immo reader,Interface connects to RS232 of PC
Read IMMO Login code from supported VAG cars via diagnostic connector
Key learning and adaption via diagnostic connector

VAG CAN Commander 5.1,Diagnostic tool for cars from Volkswagen Audi Group which using "KWP2000-CAN TP2.0"

This interface unit is built into the OBDII connector which support
ISO 9141/KWP 2000 protocol as used in Volkswagen, Audi, Skoda
and Seat.

VW GOL (Kostal immo box) , ME 7.xx engine ECU's PIN code reading

The tool for the complete access to all EEpromdaten with VAG-engine control units of type EDC15 and ME7.

The VAS 5054A remote Diagnosis Head Provides Volkswagen diagnostic application to the onboard vehicle system.

This means: VW Passat B6, Bora/Jetta, Polo to 2004 year, Golf 4, Sharan to 2003 year,Skoda Octavia/Fabia to 2004 year , some Seat dashes up to 2004 year ect...)

Latest update: VW Polo ,Seat Ibiza Cordoba 2001 - 2005, Fabia 2004 ect.

Version 2.2 DO NOT working with interfaces sold before 10 June 2006

The tool for the complete access to all EEpromdaten with VAG-engine control units of type EDC15 and ME7.

Diagnostic via CAN and Special functions via K-line.
Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.

Diagnostic tool for cars from Volkswagen Audi Group which using WP2000-CAN TP2.0
Audi Q7 and Audi A6 - odometer correction

VAG CAN COMMANDER 5.5 + PINReader 3.9Beta

Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.

This box corresponds to the Bosch control unis types EDC15 (Diesel) and ME7 (Patrol).The EDC15 control for diesel engines is installed in the models of brands VW, AUDI,SEAT and SKODA from 1999 onwards.