Bmw diagnostic tool

OPS is mainly used for diagnosis and programming BMW vehicles after E65 series . OPS unit with DIS software is used for diagnosis, which is professional tool.OPS unit with SSS software is used for programming, which is carried out via OBD-II socket and MOST socket.

BMW GT1 DIS SSS,software V57 ,V32 GT1 can complete coverage of ALL BMW systems,one thing that can only be done using the GT1, this function is called Electronic Control Unit (ECU) programming and configuration.

MCU controlled Interface for Carsoft 6.5 which is compatible with the original interface. Fully digital line switchings and MCU controlled service reset timing.

The program reads out the identification data of the found modules, defines quantity of mistakes, dumps them, and then repeats reading.

BMW Scanner 1.40 full version ,original software,for chassis E38 E39 E46 E53 E83 E85 Determination of chassis, model, engine, gearbox and complete set

for chassis E60/E61(5') E63/E64(6') E65/E66(7') E87(1') E90/E91(3') BMW Scanner E6x V2.0.1 is intended to work with BMW 1, 3, 5, 6 and 7 series in "new" chassis.

Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all functiosn as in OMNITEC interface). Build in 2 lines K and D-Can magistral

Dealing with BMW complex Electronic Control Units (ECU) along the entire process chain requires reliable communication and data description.

For E38, E39, X5 instrument cluster repair Support vehicle: 5 Series 530,528,540,M5 (E39) 1997-2003 7 Series 740,750 (E38) 1997-2001 X5 Series X5 (E53) 1999-2006 Range Rover 2003-2005

D-CAN interface is used to work with software for GT1 and INPA. It has the full functions as GT1 and INPA. The INPA and GT1 software is included. Software is dis52 base+dis55+tis2007.12+dis44(coding+progman). TIS and coding/programm functions all activated now!

D-CAN interface is used to work with software for GT1 and INPA. It has the full functions as GT1 and INPA. The INPA and GT1 software is included. Software is dis52 base+dis55+tis2007.12+dis44(coding+progman). TIS and coding/programm functions all activated now!

BMW INPA / Ediabas K+DCAN USB Interface Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all functiosn as in OMNITEC interface). Build in 2 lines K and D-Can magistral

BMW EWS 2 and EWS 3.2 immobilizer This device can emulate BMW EWS 2 and EWS 3.2 immobilizer (EWS module) in cases when original system restore is impossible (faulty EWS, lost or damaged transponders, continuous problems with rolling codes etc.).

OBD2 Diagnostic tool BMW OPPS is for vehicle models From the E65 on, BMW is for the first time using fibre-optic cables as standard for communication between control units.

BMW Explorer hardware and software system with extended engineering functionality for BMW cars of series E60, E65, E66, E70, E71, E81, E82, E87, E88, E90, E91, E92, E93, F01, F02, F07, F10, Mini Cooper R56 and Rolls-Royce.

Models that are supported by GS-911 R-Series: HP2 Enduro, HP2 Megamoto, R1200GS, R1200GS Adventure, R1200RT, R1200R, R1200ST, R1200S, R1200S HP2 R1200C, R1200CL, (single- & twin-spark on all models) R1150GS/Adventure, R1150RT, R1150R, R1150RS (single- & twin-spark on all models) R1100S (single- & twin-spark) R850C, R850R, R850RT

BMW ICOM BMW ISIS ISID A+B+C is the latest program, diagnose, coding and complete system BMW have the full system replace DIS GT1/SSS/OPS and OPPS. All BMW series can be processed with the ICOM-A, B and C-modules.

BMW Multi Tool V.6 ,Read EEPROM, Write EEPROM,ead and change KM stored in CAS ,Synchronization Codes,Key Learning,etc

BMW E/F SCANNER suits for BMW cars of series E60, E65, E66, E70, E71, E81, E82, E87, E88, E90, E91, E92, E93, F01, F02, F07, F10, Mini Cooper R56 and Rolls-Royce BMW Explorer.

1. Hardware and Software Perfectly Match: ICOM A2 Hardware Version: ICOM-PF-CORE 3.10.42 ICOM-Boot: 01.20.00 ICOM-Application: 01.33.00