Products
Tacho Programmer Tachograph Programmer CD400
Model:
Description:
New Arrival Tacho Programmer Tachograph Programmer CD400 Basically, a tachograph is a device that measures and records the speed and distance driven by a vehicle. The data are recorded in the form of graphics on a paper disk. The new digital tachographs record those data on its embedded memory and also on the smartcard of the driver. The Tachograph programmer CD400 calibrates and programs all analogue and digital tachographs. Supported Tachographs:Analogs: KTCO 1314/1318, Motometer EGK100, FTCO 1319, MTCO 1324/1390, TSU 1391, VR2400.Digitals: DTCO 1381 (DTCO® 2.1 active), SE5000 (Exakt Duo), SmarTach, EFAS-4. A Workshop Card is required to calibrate the digital tachographs Tachograph Programmer CD400 Functions: W figure determination on measuring track (with optional photo-cell) or rolling road.K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.Parameter programming.Activation and deactivation of IMS (Independent Motion Signal).Activation and deactivation of VDO counter.Odometer reset and adjustment (mileage correction).Speed simulation and customizable automatic test diagram.DTCS reading (Digital) and erasing.Sensor pairing (KITAS activation).Clock test.Workshop card's PIN recording and input through CD400. Tachograph Programmer CD400 Advantages: No power connection nor battery charging required, the only tester powered by the tachograph itself.Compact size, the smallest tachograph tester on the market.User friendly, clear 4 lines menus, no training required.Automatic tachograph model detection on power on.Double accuracy of the W factor measure on track by detecting half pulses.The only tester being able to reset the odometer and change the sender type on the VR2400.Flash program memory, easy software upgrade using a serial port or USB serial adapter on any PC. Tachograph Programmer CD400 Technical Specifications: Graphic FSTF LCD Display: (100 x 32 pix. / 4 lines x 20 char)White LED backlightSize: 150 x 100 x 45 mmSupply voltage: 9 to 30 VDCSupply current: 12mACase: green-blue ABS (IP40).Operating temp: -20…+70°CWeight: 155g Package included: 1pc x CD400 – Tacho Programmer1pc x Cable for 13191pc x Cable for 13/1318, V.Root 84001pc x Cable for EGK-1001pc x Cable for 13241pc x Cable for V.Root 24001pc x Cable for CA-RS232-11pc x Cable for Digital Tacho1pc x Manual
Previous Product:Diagprog 3 Speedodometer Programmer
Next Product:Carprog 7.28 full adapter
News
- what is the difference between tacho pro 2008 and digiprog3
2016-07-14 - New tool OBDSTAR PRO3 for immo and odometer correction
2016-07-13 - the software of HDD for vas5054 can not be copied
2016-07-12 - vas5054 full chip with OKI and bluetooth
2016-07-11 - hand baby/Cbay open G function
2016-07-10 - the active of FVDI2
2016-07-07 - Launch X431 GDS 12-24V English Diesel Diagnostic Configuration Heavy Duty
2016-07-06 - X100 PAD original key programmer of xtool
2016-07-05 - the code of digiprog3 odometer correction
2016-07-04 - New MB SD Connect Compact 4 with UDS diagnose protocol
2016-07-03
New Products
Partners
Contact Us
Email: sale@car2diag.com
MSN: sale@car2diag.com
SKYPE: autocables
SKYPE: car2diag03