GS-400

GS400

• Wider vehicle coverage with CAN Protocol support
• Displays DTC's / Generic Codes P0, P2, P3, U0 and Manufacturer Specific Codes P1, P3, and U1
• Displays OBD2 monitor and I/M Readiness Status
• Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9
• Reset Check Engine Lights
• Determines the malfunction indicator lamp (MIL) status
• Displays Total # of Codes Retrieved
• Identifies and Displays Pending Codes
• Code Definitions Displayed on unit Screen
• Detects OBD-II Freeze Frame Information
• Memory / Battery backup for off-car review and analysis
• Unit can be flash updated with a standard Windows PC
• Highly reliable and accurate
• Easy-to-read crystal-clear backlit large LCD display
• Easy to use with one plug-in
• Stand-alone unit with no need for an additional laptop computer to operate
• Safely communicates with the on-board computer
• Detachable and replaceable 16-Pin OBD2 Cable

Included Communication Protocols:
• C.A.N. (Controller Area Network)
• ISO 9141
• J1850PWM
• J1850VPW
• KWP 2000 ISO 14230-4
• EKWP 2000


Specifications
• Display: 128 x 64 backlit LCD display
• Operating Temperature: 0 to 50¡ãC (-32 to 122 F¡ã)
• Storage Temperature: -20 to 70¡ãC (-4 to 158 F¡ã)
• External Power: 10.0 to 15.5 Volts provided via vehicle battery
• Internal Power: 9V Cell
• Dimensions:

Length	Width	Height
200 mm (7.8¡¡À)	90 mm (3.5¡¡À)	34mm (1.3¡¡À)

NW: 0.60 Kg(1.3lb), GW: 0.80Kg(1.8lb)

STANDARDS: FCC Certified
INDIVIDUAL PACKING CASE (10in x8.0in x 3.0in);

MAINTENANCE:
One year warranty, full life maintenance.

HEX USB CAN VAG COM - transponder key programmer - car diagnostic interface - Odometer mileage correction - auto immo reader - auto ecu chip turning