Products
Original V4.5.3 Xhorse VVDI PROG Programmer Ship From US
Model:
Description:
VVDI PROG Programmer
Buy VVDI-Prog programmer, get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service
Latest Software Version: V4.5.3
https://mega.nz/#!3hxDELQB!RwW0wEXMInsqUSuyyCEVaCEmONX3qGO5UgxP0hxVDzE Password: 123456
Firmware Version: 1.2.2
VVDI PROG Latest Software Version V4.5.2 Update
v4.5.2 (2016-11-25)
VVDI PROG Programmer v4.1.3 (2015-12-11)
Main Feature:
1. The built-in update software allows user to update VVDIProg firmware timely.
2. High-speed USB communication interface enable the software automatically connect.
3. Smart operation mode: the possible causes of error will be listed
4. Reserve ports: for future update.
5. The self-test function enable you check if the machine works well.
6. Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.
Update Information:
Buy VVDI-Prog programmer, get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service
Latest Software Version: V4.5.3
https://mega.nz/#!3hxDELQB!RwW0wEXMInsqUSuyyCEVaCEmONX3qGO5UgxP0hxVDzE Password: 123456
Firmware Version: 1.2.2
VVDI PROG Latest Software Version V4.5.2 Update
v4.5.2 (2016-11-25)
VVDI PROG Programmer v4.1.3 (2015-12-11)
* This version DON't need update
firmware
+ Add PA28F200B5T(PSOP44),
* Fix MC9S12xx64 Crack/Read/Write function
Main Feature:
1. The built-in update software allows user to update VVDIProg firmware timely.
2. High-speed USB communication interface enable the software automatically connect.
3. Smart operation mode: the possible causes of error will be listed
4. Reserve ports: for future update.
5. The self-test function enable you check if the machine works well.
6. Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.
Update Information:
VVDI PROG key Programmer V3.4.0 Update
* This version DON't need update firmware
* Fix some display BUGs in EnglishVersion
* Change the name of upgrade button as "Start Firmware Upgrade"
* Change the Voltage name as "VCC" "VPP"
Adapters Detailed Description:
16Pin Locking Socket
Read the common EEPROOM, note: please insert the chip by following the below picture.
1.3.2 MCU Reflash Cable
Used to program MCU on board
1.3.3 ECU Reflash Cable
Used to program ECU
1.3.4 MC9S12 Reflash Cable
Used to program MC9S12 series chip
16Pin Locking Socket
Read the common EEPROOM, note: please insert the chip by following the below picture.
1.3.2 MCU Reflash Cable
Used to program MCU on board
1.3.3 ECU Reflash Cable
Used to program ECU
1.3.4 MC9S12 Reflash Cable
Used to program MC9S12 series chip
Previous Product:Latest Version xprog XPROG-M V5.70 X-PROG Box ECU Programmer
Related Product
News
- what is the difference between tacho pro 2008 and digiprog3
2016-07-14 - New tool OBDSTAR PRO3 for immo and odometer correction
2016-07-13 - the software of HDD for vas5054 can not be copied
2016-07-12 - vas5054 full chip with OKI and bluetooth
2016-07-11 - hand baby/Cbay open G function
2016-07-10 - the active of FVDI2
2016-07-07 - Launch X431 GDS 12-24V English Diesel Diagnostic Configuration Heavy Duty
2016-07-06 - X100 PAD original key programmer of xtool
2016-07-05 - the code of digiprog3 odometer correction
2016-07-04 - New MB SD Connect Compact 4 with UDS diagnose protocol
2016-07-03
New Products
Partners
Contact Us
Email: sale@car2diag.com
MSN: sale@car2diag.com
SKYPE: autocables
SKYPE: car2diag03