Products
IKEYCUTTER CONDOR XC-007 Master Series Key Cutting Machine
Model:
Description:
IKEYCUTTER CONDOR XC-007 Master Series Key Cutting Machine
XC-007 Key Cutting Machine Highlights:
1. Internal Software
Internal software is based on well know and respected instacode software. Software shows key cuts on the touch-up LCD screen, allows to calculate cuts when we need it(in case of broken keys,etc.)
Software is fully upgradable through pc of internet.
2.Touch-Up Screen
All features of the XC-007 are covered with the use of touch-up screen or keys that are situated convenienty on the side of the screen(you can use them during some heavy works, if you do not want to scratch or smudge screen)
3.Change Cutter Easily
When you need new cutter, simply press, wait for a click, turn knob and then you can take out an old cutter and put a new one into the machine and keep working. No need any special tools and a long break in your working time.
4. Simple to Use
Universal clamp allows you to mount keys in easy and certain way, so your work can be done in a way you want.
5. High Accurancy
Tracer and cutter are mounted on the same tower to increasing the machine accurancy and lower the possiblity of any malfunction during process of reading or cutting. Calibration of cutter and tracer is very easy and takes just a few moments.
6.LED Illumination
Dring process or designing and producing, our main focus was lower power requirement and low weight of the machine. So we used an LED illumination to achieve our goals.
7.Specially Designed Tray
Located on the side of the machine, the specially designed tray allows you to keep your cutters and tracers in one place and just in your reach. So you can pick they up easily.
8. All connectors that are used by XC-007 are conveniently located on the back of the machine, so they are protected during use.
Related Pics:
Related Pics:
Previous Product:BMW AK90 Key Programmer AK90+ for All BMW EWS Newest Version V3.19
Next Product:JMA TRS5000+ID46 Decoder Box ID 46 Copy Box
Related Product
News
- what is the difference between tacho pro 2008 and digiprog3
2016-07-14 - New tool OBDSTAR PRO3 for immo and odometer correction
2016-07-13 - the software of HDD for vas5054 can not be copied
2016-07-12 - vas5054 full chip with OKI and bluetooth
2016-07-11 - hand baby/Cbay open G function
2016-07-10 - the active of FVDI2
2016-07-07 - Launch X431 GDS 12-24V English Diesel Diagnostic Configuration Heavy Duty
2016-07-06 - X100 PAD original key programmer of xtool
2016-07-05 - the code of digiprog3 odometer correction
2016-07-04 - New MB SD Connect Compact 4 with UDS diagnose protocol
2016-07-03
New Products
Partners
Contact Us
Email: sale@car2diag.com
MSN: sale@car2diag.com
SKYPE: autocables
SKYPE: car2diag03