468 KEY PRO III Copy Key Programmer
468 KEY PRO third generation
468 Key Pro III is a key programmer used to copy ID46 chips. It is easy for you to read and write 46 chips information.
Language: English
468 KEY PRO 3-generation machine functions:
1 can copy 46 chips, the same methods as JMA and CN900
2,use dedicated 46-46C chip to copy
3.46C represents 46 of the chip can be copied (functions are the same as JMATPX4, CN3 chip , but can not be used in the CN900. It can only be used in 468KEYPRO machine)
4 can write 48 chips PG3 ID number, use OEM48 chip to copy.
468 Key Pro III Operate steps:
1,Turn on the Left switch of 468 KEY PRO third generation, after turn on it, the main interface pops up. Then click copy. copy46
2. Click CMT46 collect Upper left corner of the screen.
3. This page is a copy of the ID46-chip page, now it is copying ID46 chip.
3.1.Put the original chip vertically into the bottom right corner of the hole, click on read UID. Note: Do not going to be flat on the hole nearby, this is not easy to read information inside the chip.
3.2.Put the new key vertically into the bottom right corner of the hole, click on Conf ig. Note: Do not going to be flat on the hole nearby, this is not easy to read information inside the chip.
3.3.Use new car key collect information in car,first of all,take a key blank, put the new key into the key blank, insert the car key hole, four consecutive starts,each time interval of 3-5 seconds
3.4.Put the key which already collected information vertically into the bottom right corner of the hole, click on read. Screen will appear a set of "random number" andsignature.
4.After crack Original key , put the original key hole vertically into the bottom right corner, click on crack, the screen will display the progress of the original key crack.
5.New key copy. Put the key which already collected information vertically into the bottom right corner of the hole, click on Copy. Screen will display copy successful" message.
6.If in the process, chip key copy failed, put the key into bottom right corner of the hole, click on Initialize, restart again from the first step.
How to Update 468 KEY PRO third generation?
1 install the driver
2 open the upgrade program selected com port
3 open the file in the upgrade program (upgrade v1.02 New. Bin)
4 the upgrade button will turn black after you click on the electrical source,just waiting until walking a scroll bar
5 PCS prompt upgrade success
Package including:
1pc x 468 KEY PRO
- what is the difference between tacho pro 2008 and digiprog3
2016-07-14 - New tool OBDSTAR PRO3 for immo and odometer correction
2016-07-13 - the software of HDD for vas5054 can not be copied
2016-07-12 - vas5054 full chip with OKI and bluetooth
2016-07-11 - hand baby/Cbay open G function
2016-07-10 - the active of FVDI2
2016-07-07 - Launch X431 GDS 12-24V English Diesel Diagnostic Configuration Heavy Duty
2016-07-06 - X100 PAD original key programmer of xtool
2016-07-05 - the code of digiprog3 odometer correction
2016-07-04 - New MB SD Connect Compact 4 with UDS diagnose protocol
2016-07-03
Email: sale@car2diag.com
MSN: sale@car2diag.com
SKYPE: autocables
SKYPE: car2diag03